All fields are required.

Close Appointment form

Rotary Drum Dryer

Rotary Drum Dryer is designed to dry the material which contains high moisture up to 50%. Heat is generated by hot air generator by wood/Briquetts. Material is conveyed by screw at feeding point. Material spreaded by lifters in horizontal shell. Hot air is sucked by fan through shell in the presence of wet material. At end point material dry material comes out with the help of cyclone & Rotary valve with required moisture. Evaporated moisture goes in atmosphere by sucking fan. Various models are available as per moisture / production requirement Material is acceptable in 25 mm lengh 8-10mm width & 2-3mm thickness. Total system is automated & moisture in material is adjustable as per requirement in various sectors.

 

Rotary Drum Dryer
Power
1000 kg/h
19 hp
1500 kg/h
25 hp
2000 kg/h
40 hp
5000 kg/h
63 hp

 

The Rotary Dryer is made up of Hot Air Generator, Main Rotary Shell, Screw Conveyor, Cyclone Separator, Air-lock, Fan and Pneumatic Pipe line which can realize to reduce the moisture from 50%-10%.

Hot air is generated by wood/ Briquettes. Material is conveyed by screw at feeding point. Material is spreaded by lifters in horizontal shell. Hot air is sucked by fan through shell in the presence of wet material. With the rotation of cylinder, the material flow down to the lower end with the effect of gravity and discharge after drying, at end point material comes out with the help of cyclone & Rotary valve with required moisture. Evaporated moisture goes in atmosphere by sucking fan.

Various models are available as per moisture/production requirement. Material is acceptable in 25mm length 8-10mm width & 2-3mm thickness. Total system is automated & moisture in material is adjustable as per requirement in various sectors.

 Depending upon Raw material, Moisture and required production we can suggest suitable model and an approximate cost of your system in a short time frame.

Send Inquiry